Sonoris Audio Engineering has just released Sonoris Meter v2.0. With this plugin, you can accurately measure peak and loudness levels of audio signals, at one scale. Besides a regular meter scale the Sonoris Meter supports the K-System, from Bob Katz, mastering engineer and founder of Digido masteringstudio. During the development period of this plugin Bob Katz was very helpful in providing information. The end product closely follows the K-system specifications, including Leq(A) loudness metering and bandlimited pink noise monitor calibration.
The SMTR features an oversampling peakmeter mode. In this mode the SMTR catches intersample peaks that can cause ear fatiguing sound when audio is played on consumer CD players. Many CD players have inferior D/A converters with little headroom that will distort with samples above the clip level. These peaks occur when the audio is clipped (read squashed / limited) or otherwise digitally manipulated (eg. VSTi's). In oversampling mode the SMTR models the D/A conversion process and allows for maximizing the level but avoiding this distortion.
At the bottom of the interface a correlation meter can be found. This meter enables the user to monitor the phase relationship between the left and right channels.
Features :
- K-System metering, closely following the K-System spec. , with three metering sets :
. K12 for broadcast productions
. K14 for home theatre, pop, rock, folk, etc
. K20 for wide dynamic music
- Regular, non K-system scale also available
- High resolution metering of peak and loudness levels, on the same scale
- Intersample peak metering mode
- Correlation meter
- Peakhold function with resetable indicators or 10 seconds hold
- Loudness measurement methods: RMS/flat (AES-17) and Leq(A-weighted)
- Pink noise output (left, right or stereo) for monitor calibration of 0dBr / 83dB
- Adjustable number of consecutive overs before clipping
- Resettable clipping indicators
- Resettable clipping incident counters
- Mousewheel support
- All samplerates supported
- Low CPU load
- Settings can be saved
- 64 bit resolution
Sonoris Meter v2.0 is available now for Windows in VST format and is priced at $125.
